It’s great to have a toolbox or tool bag at work

It’s like you have your workshop with you, and everything you need to get the job done is within reach always. But there are instances when bringing a toolbox or tool bag is impractical, like when you need to climb a ladder or when there’s barely enough elbow room in a space you’re working in. In cases like these, what you need is a tool belt, a space-saving garment where you can store essential tools.

Today, we’re going to take a look at some of the best tool belts you purchase online. In this review, we’re going to check out basic tool belts, as well as multi-pocketed carpenter tool belts. We’re also going to compare waist tool belts and tool belt suspenders and see which design is ideal for your job. We’ve also come up with a buying guide to help you get started.


Gatorback B145 Carpenters Triple Combo w/Pro-Comfort Back Support Belt. For Best Fit Measure ACTUAL WAIST SIZE OVER CLOTHES. (Large 36"-40")

WARRANTY: Every product sold by Gatorback is backed by a one year defect free warranty! If there is a problem with the bags such as a rivet or stitching, contact us, we will replace the defective piece on your belt free of charge! The product must be purchased from us to be protected under our warranty.
SIZING: All of the Gatorback sizing is based off the average fit for each size, if there is any issue with sizing contact us before returning and we will send out the size you need free of charge! We like to look out for our customers!
MAXIMUM COMFORT: The Gatorback Tool Belts have a patented air channel design to provide the user with a breathable, comfortable and sweat free experience. Even the foam backing we use in our belts is an ultra-breathable material to keep the belt cool and comfortable!
BUILT TOUGH: EVERY stress point on the pouches and on the belt are riveted AND bar tacked to ensure the pouches hold up for a long time! The material used on every Gatorback item is heavy duty 1250 DuraTek nylon, this keeps the pouches rugged and durable but light enough to not weigh you down. The right side is our Carpenters Tool Pouch w/Hammer Loop. Center Pouch is our 8" deep Single Pouch and the left side has our 7 Pocket Fastener tool pouch with wide, easy to access pockets.
BOX DESIGN: All of our pouches have an interior plastic lining to give them a box shape that won't sag. Unlike other pouches that are sewn at a point, the box design keeps the pouches open, accessible and prevents tools from poking holes through the bottom.

Check Price Below

Buy on Amazon



CLC Custom Leathercraft 1614 20 Pocket, Heavy Duty Framers 5 Piece Comfortlift Combo Tool Belt System

3" PADDED BELT: Single roller buckle.
KEEPS CONTENTS SAFE: Easy carry handle design for simple adjustments and easy storage without spilling contents.
EASY ACCESS: Stay-Open main pockets are tapered for faster access to contents
COMFORTABLE: Completely adjustable suspenders engineered to hold and distribute weight evenly without strain on lower back and hips

Check Price Below

Buy on Amazon


MagnoGrip 002-610 20-Pocket Magnetic Builder's Tool Rig, Black

20 pockets for storing tools. Suspender includes a detachable magnet and built-in cell phone holder.
Magnetic nail pockets for more secure tool storage.
Padded belt for back support and greater comfort.
Key stress points are reinforced with rivets.
Made of durable 1680D ballistic polyester.

Check Price Below

Buy on Amazon



Dead On Tools - 1680 Denier Poly Carpenter’s Tool Belt with Suspenders (HDP400945)

17 inside pockets and 7 outside pockets with a drill holder, steel-loop hammer holder, tape-measure holder and more
100-percentage gel-padded suspenders help provide the user with comfort
Vinyl reinforced pouches
Belt fits upto 52 inch
3 main nail bags and cell phone holder

Check Price Below

Buy on Amazon



Bucket Boss Mullet Buster 3 Bag Tool Belt with Suspenders in Grey, 55135, Black, full size

LoadBear stretch suspenders for easier movement
Infinity belt fits up to a 52” waist
Barrel-bottom, super capacity pouches
Single body construction
Adjustable pouch and rigging system

Check Price Below

Buy on Amazon


Style n Craft 98444 19 Pkt Framer's Combo in Top Grain Leather (4 Piece), Tan

19 pocket 4 piece double pouch design framer's Combo in top grain leather in dark tan Color
Extra outer pocket on the front pocket foe left side pouch for extra storage
Versatile Pliers & hammer holder in heavy top grain leather between the main pockets
Pry bar, square & combination square holders as well as tape holder & hammer loop in top grain leather with 6 internal smaller pockets
3" wide tapered heavy top grain leather belt with double prong metal roller buckle fits waist size 34"- 46" (measure waist size over clothes)

Check Price Below

Buy on Amazon


FASITE PTN012A 32-Pocket 2 Pouch Utility Multifunction Tool Belt Bag, Blue

Multiple storage purpose belt: 32 pockets, 2 hammer loops, 1 steel measuring tape holder and 1 steel hammer holder. Size: 11.5×8.7×3.9(2×)inches. Adjustable heavy-duty belt, max size of 48 inches.
Ergonomic design and superior material: good quality, very light, versatile, strong and sturdy. Comfortable to wear. Materiel is high quality and waterproof.
Large capacity and functional: can hold hardware tools, garden tools, electrical tools, car tools and many other tools.
Special design details: designed for professional tradesmen who work at heights and walk long distances on a daily basis.
Money back guarantee: we provide a one year guarantee to all our customers. Go ahead, you have nothing to lose. If you are not satisfied with your purchase, we will RETURN your money or replace one.

Check Price Below

Buy on Amazon

1. Gatorback B145 Carpenters Belt


The belt has a breathable Memory Foam pad that supports and eases the pressure off your waist.
The top of the spacious pockets features rigid nylon webbing straps to keep the opening from collapsing.
The sturdy nickel-plated steel suspension rings in case you want to attach a four-point suspender to it.
The pockets’ stiff “box” construction, as well as durable plastic inserts that keep sharp tools from poking holes through the bottom.


This tool belt is quite pricey.

Sebring Tip:

The Gatorback B145 Carpenters Belt is another good candidate for the best tool belt available online. This tool belt features multiple pockets to keep your tools always within reach as you work. There are three large tool pouches for larger tools, plus amply-spaced compartments with nylon webbing that keeps the opening from closing in. You’ll get two metal loops on each side for easier access to your hammer whether your left or right hand is your dominant hand. The pockets feature multiple stitching, plus bar-tacked and riveted to the belt for reinforcement.

Now onto the belt. The belt is wider than the usual and features a textured Memory foam pad for optimum back comfort. Unlike other tool belts, it has heavy-duty leather tips. There’s a secure buckle closure, as well as two handles to make the belt easier to carry if you’re not wearing it.

This belt is more expensive than most, but the price is worth it thanks to its durability and abundance of pockets.

2. CLC Custom Leathercraft 1614 Combo Tool Belt System


This tool belt features a whopping 20 pockets for all your essential tools.
The pouches feature a barrel-bottom construction with a rigid lip that keeps the opening from collapsing.
The metal grommets that attach the suspender to the belt are sturdy.
This tool belt is affordable.
The sternum strap distributes the weight of this tool belt equally.


It’s quite bulky. You’ll have trouble fitting into tight spaces while wearing this tool belt.
The opening of some of the pouches is too wide that tools sometimes fall out when you bend or kneel.

Sebring Tip:

The CLC Custom Leathercraft 1614 Combo Tool Belt System keeps all your most essential hand tools in one place and always within reach. It features an impressive number of pockets where you can store an assortment of tools. The spacious pouches feature a rigid bottom to ensure that they won’t sag or lose shape when you put a particularly heavy tool inside. On the plus side, they are large enough to accommodate some power tools. But the pouches can be too large as tools sometimes fall out when the wearer is bending or kneeling.

The belt is 3 inches thick and padded to prevent it from biting into your skin. There’s a single metal buckle closure, plus adjustable suspenders with padded straps. The padding, however, is not as thick as those on other tool rigs, so they might not offer maximum protection for your shoulders.

This is one of the least expensive tool belt systems on the list, making it a sensible option if you’re on a budget.

3. MagnoGrip 002-610 Magnetic Builder’s Tool Rig


The padded shoulder straps prevent the fabric from digging into your skin.
This tool belt comes with as much as 20 pockets.
It has magnetic nail pockets.
The belt and suspender are adjustable to fit different body types.
The tool rig’s cellphone holder and detachable magnet.


Some of the pockets don’t stay open.
The tool rig is on the pricey side.

Sebring Tip:

You’ve tried those tool vests and tool aprons, but sadly, they’re just not for you. They’re too bulky, and some are just too hot during summer. If you’re looking to combine the convenience of a tool belt with the comfort offered by a tool vest, then you might want to get a tool rig. One of the most popular tool rigs in the market right now is the MagnoGrip 002-610 20-Pocket Magnetic Builder’s Tool Rig.

This is no ordinary tool belt. It features a thick tool belt with convenient and secure buckle closure. The belt has metal grommets, so you can easily adjust it around your waist. It has two pockets of various sizes, allowing you to keep your pliers, laser level, screwdrivers, and other hand tools within reach. You’ll also get magnetic nail pockets for easy access to your fasteners while you’re working.

The suspender can be adjusted to fit different body types, but it tends to run large. It has a sternum strap that helps distribute weight evenly across your upper body.

4. Dead On Tools HDP400945 Carpenter’s Tool Belt


The wide belt can accommodate up to a 52-inch waistline.
The suspender features gel-padded shoulder straps for added comfort.
This tool belt system features 24 pockets.
Some pockets are customized for certain tools.
It has a cellphone holder attached to one shoulder strap.


It can be quite heavy.
The size is ideal for taller individuals.

Sebring Tip:

Tool belts are great, but some are so poorly designed that the belt pinches the skin of your waist and causes pain. If you’re looking for a more comfortable version, then you might want to check out the Dead On Tools HDP400945 Carpenter’s Tool Belt. This is not your ordinary tool belt. It features a suspender/harness with gel-padded shoulder straps and an adjustable sternum strap. The length of the suspender can be adjusted, but keep in mind that this tool belt system is designed for taller wearers. 

The belt itself is wide and durable. It is padded, too, to prevent it from digging into your waist. It features multiple pockets of different sizes, and the biggest one can accommodate even your speed square. With a durable steel hammer loop for easy access to the most essential tool. 

It is made of heavy-duty 1680 poly fabric that is stronger than your regular canvas or polyester. It is also moisture-wicking, so you’ll feel comfy even while working in the middle of summer.

5. Bucket Boss Mullet Buster 3 Bag Tool Belt


You’ll get an assortment of pouches in different sizes.
It features padded shoulder straps with a sternum strap.
The belt has durable giant grommets.
The pouches feature a barrel-bottom construction, as well as rigid nylon webbing trims to keep the top of the pouch open.


The belt itself is not as thick or as rugged compared to the others on the list.

Sebring Tip:

A tool bag’s great for having almost all of your tools in one place while working. But it can sometimes get too much when all you want is to bring the most essential hand tools and even a compact power tool or two. You might want to check out the Bucket Boss Mullet Buster 3 Bag Tool Belt if this is the case. 

This tool belt has pockets galore. You’ll get large pouches for large hand tools, your impact driver, or even some fasteners for your brad nailer or framing nailer. Plus, there are smaller pockets for your tape measure, wrench, and more.

The belt’s metal buckle and large grommets secure the belt around your waist. The belt is long enough that you can wear it even when you have a considerable paunch. My only misgiving is that it’s not as wide or as thick as the other belts we have reviewed.

The shoulder straps are padded to prevent pain and chafing. You’ll also get a cell phone holder so can stay updated even at work. This tool belt system is quite pricey, so it might not work out for you if you’re on a budget.

6. Style n Craft 98444 Framer’s Combo Belt


This tool belt is made of smooth yet heavy-duty top grain leather.
It has much as 19 pockets.
The belt can accommodate a waistline measuring between 34 to 46 inches.
The easily accessible hammer loop.
The pockets are spacious and the lips are rigid so they don’t collapse whenever you draw out a tool.


This is one of the priciest tool belts available right now.
The leather is on the thinner side.

Sebring Tip:

If you want to go old school, then you might want to check out the Style n Craft 98444 Framer’s Combo Belt. This tool stands out because of its unique leather construction, making it ideal for carpenters and framers. It has an assortment of pockets that can accommodate hand tools and even some compact power tools. 

The pockets have a boxy construction, and the lips are rigid for a hassle-free time at work. The metal hammer loop is positioned in a way that you’d be comfortable using it whether you’re left or right-handed.

This leather tool belt features a secure two-prong buckle and can accommodate a wide variety of waist sizes. With metal rivets to reinforce the stitching, but the stitching itself is not as durable. It also has two handles on top to make transport or storage easier.

7. FASITE PTN012A Tool Belt


This is one of the most affordable tool belts in the market.
The pouches are large and waterproof.
The pockets and belt are made of heavy-duty 900D polyester fabric.
The belt is padded and is adjustable to fit your waist.


The buckle is made of plastic.
The stitching is not as durable.

Sebring Tip:

The FASITE PTN012A Tool Belt is another tool belt system you can purchase online. This polyester tool belt features an assortment of pockets where you can store all your essential tools, whether it’s a set of wrenches or your brand-new torpedo level. The larger pouches are deeper, so you can store your tools without them falling out when you bend or kneel. Plus, it has a metal hammer loop to keep your trusty hammer within reach always.

The fabric is 900D polyester, making it thick, durable, and waterproof. But the fact that the pouches have an open-top kind of defeats the waterproofing property of the fabric. The stitching is okay, but not outstanding and is reinforced by metal rivets. Also, the tops of the pockets are lined with rigid webbing to ensure hassle-free tool storage.

Another weak point of this tool belt is its buckle. While other buckles are made of heavy-duty metal, this one’s made of plastic. That’s great if you’re going to carry a few lightweight tools. But if you’re planning to carry a lot of tools and they’re heavy, then you might want to reconsider buying it.

Choosing the Best Tool Belt

Tool Belt Material and Durability

Most of the work belts you’ll see today are made of synthetic fabrics, specifically nylon and polyester. These fabrics are durable, lightweight, and easy to maintain. They do not shrink, and they are abrasion- and wrinkle-resistant. Nylon, however, is prone to fading after prolonged exposure to sunlight, while polyester is notoriously hot in humid weather.

Top grain, suede, and other types of leather are another material used to make tool belts. They are more than just aesthetically pleasing. They are also impressively sturdy and versatile. Sharp tools, for example, will easily poke through thin polyester and nylon tool belts. Not so with leather tool belts. Plus, maintenance is so easy with this type of tool belt. 

The problem with leather tool belts is that they are quite expensive. They can get hot in summer, and your color choices can be rather limited. Although leather is easy to care for, you have to do it regularly to prevent the growth of mold and mildew, and prevent disintegration.


The most basic tool belts only have a few pockets. This Dickies Tool Belt, for example, only has five pockets. It is lightweight and not as cumbersome as other tool belts with numerous pockets. Plus, it forces you to simplify your workflow because you have to bring only the most essential of tools. You can always bring a portable toolbox or tool bag at work so you can have other tools within reach while you’re wearing this tool belt.  

But there are instances when carrying a very basic tool belt and lugging around a toolbox won’t do. Maybe it’s because the space in the jobsite is limited, or maybe you need to climb a ladder.  In any case, a tool belt with numerous pockets is the most practical choice. This DEWALT DG5617 Pro Framer’s Tool Belt, for example, features a whopping twenty pockets. That’s plenty of space for your pliers, screwdrivers, pens, and even some nails for your brad nailer or micro pin nailer. Most of your essential tools can be stored inside this tool belt, but the bad news is the belt can be heavy once loaded.

The position of the pockets can also affect how you work. If you frequently climb ladders at work, for example, a tool belt with pockets located in front of the belt can often get in your way. If this is the case, then choose a tool belt with the pockets positioned at the sides. You can also get a tool belt with pockets that can be detached or moved to the side to get them out of your way. 

Waist Size

When it comes to finding the right clothes, shoes, belts, and other garments, it’s always sensible to go to the store so you can try them on. But in cases when you have to buy online because you live far from the store or you just want the convenience of online shopping, then it’s best to check the measurements given by the manufacturer. Make sure to pay attention to the minimum and maximum waist size to make sure that it can accommodate your waist size.


Tool belts are available in two designs: the basic tool belt that wraps around your waist and the harness-style tool belts. Basic waist tool belts need no introduction — you probably own one or two if you’ve been DIYing or have been working in the construction industry for many years. They’re easy and convenient to use, but some poorly made belts can dig into the skin of your waist. Padded tool belts are a good choice as they are more comfortable. Make sure to store your tools properly, too, to prevent it from sagging or losing shape.

Waist tool belts can sometimes be uncomfortable and heavy when loaded with too many tools. You can take the pressure off your waist or hips by getting a harness-style or suspender tool belt instead. With this type of tool belt, a portion of the weight of the tool belt and the tools is transferred on your shoulders. A sternum strap distributes the weight of the belt and the tools evenly in your upper body. When choosing the right tool belt, always go for ones with good padding to prevent the harness from digging into your skin and chafing your shoulders.


Our choice for the best tool belt is the Gatorback B145 Carpenters Belt. All the products we have reviewed here have their own pros and cons, but this particular carpenters belt stands out because of the high level of workmanship and several features the belt has. Let’s take a look at these features one by one.

This tool belt features multiple large pockets for the most essential tools. These pockets feature a “box” bottom to prevent the pouches from sagging when you put a particularly heavy or pointy tool inside. The lip of each pouch is sewn with rigid webbing to keep it from collapsing and to prevent wear. They also come with small tool pouches for tiny fasteners and smaller tools. You get two hammer loops positioned on either side to accommodate your dominant hand.

The quality of stitching a tool belt has can either make or break it. This Gatorback tool belt features durable seams, bartacks, and metal rivets for reinforcement. The belt itself is wide and made of durable material, and made more comfortable by the memory foam pad located at the back. Unlike other tool belts, this one has leather tips with two-prong buckle closure. 

It doesn’t have a harness, but you can always purchase one and attach it to this belt as it already has metal suspender rings. The tool belt is available in different sizes (from small to 3XL) to accommodate a variety of waist sizes.

Other Great Articles to Read:


To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Tool Belts [2020 Reviews] appeared first on Home Remodeling Contractors | Sebring Design Build.

#ToolBelt #HarnessToolBelt #SuspenderToolBelt #ToolReview #ToolStorage
ToolBelt HarnessToolBelt SuspenderToolBelt ToolReview ToolStorage